Physical Address
304 North Cardinal St.
Dorchester Center, MA 02124
For the life of the flesh is in the blood. Leviticus 17:11
Total blood volume (TBV) = 70 mL/kg total body weight (80 mL/kg for newborns)
Total volume red blood cells (RBCs) = TBV × hematocrit
Approximately 26 mL/kg for male patients, 24 mL/kg for female patients
Can be measured using chromium-tagged erythrocytes, but this is not often performed clinically
Total plasma volume = TBV × (1 − hematocrit)
Class I and II classically are managed with crystalloid.
I | II | III | IV | |
---|---|---|---|---|
Blood loss (mL) | <750 | 750–1500 | 1500–2000 | >2000 |
Blood loss (% blood volume) | <15 | 15–30 | 30–40 | >40 |
Pulse rate/min | <100 | 100–120 | 120–140 | >140 |
Blood pressure | Normal | Normal | Decreased | Decreased |
Pulse pressure | Normal | Decreased | Decreased | Decreased |
Respiratory rate/min | 14–20 | 20–30 | 30–40 | >35 |
Urine/output (mL/h) | >30 | 20–30 | 5–15 | Negligible |
Mental status | Normal | Mildly anxious | Anxious, confused | Confused, lethargic |
Class III and IV typically require blood products.
Typing—serologic compatibility established for donor and recipient A, B, O, and Rh antigen groups
Screening—tests recipient blood for presence of common antibodies (indirect Coombs test)
Crossmatching—tests for compatibility of recipient blood with a specific blood product to be infused. Test mixes donor’s RBCs and recipient’s serum, drawn less than 72 hours before test takes place.
Allow 30 minutes for frozen products to thaw or for cold products to be warmed. Products should be warmed to 33°C–35°C before or during infusion.
Ensure the patient has appropriate intravenous or intraosseous access.
Before administration of blood product, the patient’s name, medical record number, blood product ordered, blood type, and product’s expiration date should be checked, ideally by two people together.
Use a standard blood filter to remove clots or large aggregates of cells.
Check vital signs at minimum before beginning infusion, 15 minutes into infusion, and after completion of transfusion of each unit.
Hemoglobin (13.5–18.0 g/dL in males, 12.0–16.0 g/dL in females); hematocrit (40%–54% in males, 38%–47% in females)
Platelets: from 150,000 to 400,000/mm 3 ; 50,000/mm 3 is required for normal hemostasis.
Evaluates production of vitamin K–dependent factors (II, VII, IX, X); indicates function of extrinsic pathway
Increased when functional volume of one or more factors is less than 50% (reference range, 12–14 seconds)
Developed because of laboratory variations in prothrombin time (PT) results caused by variations in thromboplastin (PT test reagent) activity; used to modulate warfarin therapy (reference, 1.0)
Evaluates function of intrinsic pathway
Increased when functional volume of one or more factors is less than 50% (reference range, 40–60 seconds, varies by laboratory)
Similar to activated partial thromboplastin time (aPTT) but designed to measure clotting time after administration of heparin. It correlates linearly with concentration of heparin in blood. Normal range 70–180 seconds, and therapeutic range varies with indication.
Evaluates platelet function and blood vessel integrity (reference range, 2.5–5.5 minutes)
Assessed with small cut on patient’s skin
Multiple available technologies, including several point-of-care tests
Alternative to bleeding time for diagnosis of congenital and acquired platelet disorders
Measures polymerization of fibrinogen
Normal fibrinogen levels are 200–400 mg/dL, functional level is greater than 150 mg/dL. Affects PT and aPTT when less than 50 mg/dL
Point-of-care functional assessment of clot formation, strength, and lysis. Two available technologies: thromboelastography (TEG) and rotational thromboelastometry (ROTEM)
Similar technology and comparable results ( Fig. 11.1 )
TEG more prevalent in North America; ROTEM more prevalent in Europe
Useful to distinguish between medical and surgical bleeding and to guide ongoing blood product resuscitation
Must be ABO identical, crossmatch required
Banked whole blood usually stored in 500-mL units
Stored at 4°C in citrate/phosphate/dextrose preservative for up to 21 days
Contains all blood components
This is a poor source of platelets, which lose function after stored for 24 hours in whole blood.
Clotting factors are stable in whole blood for up to 12 days, except factors V and VIII.
Storage lesion: Intracellular 2,3-diphosphoglycerate (DPG) and adenosine triphosphate are reduced during storage; hemoglobin dissociation curve shifts to the left (more affinity for oxygen); pH decreases; and lactate, ammonia, and potassium increase.
Indications
Used during mass casualty or military operations. May be supplied by fresh donations
Burn surgery—used perioperatively when large losses of blood, platelets, and bleeding factors are expected
Decreases donor exposure but generally less widely available than blood components
Autologous blood
This may be collected before surgery for perioperative use, although use is increasingly uncommon with improved disease screening.
Up to 5 units may be collected over 40 days before surgery.
Erythropoietin is given to hasten generation of blood cells.
Fresh whole blood
Administered within 48 hours of donation
May be more effective than component therapy but usually administered untested for infectious disease due to time constraints
“Walking blood bank”—group of donors tested frequently when transfusions are likely (military operations)
Become a Clinical Tree membership for Full access and enjoy Unlimited articles
If you are a member. Log in here