Procedures


Intramuscular injection

Intramuscular (into the muscle) injection of epinephrine is used to manage a severe allergic reaction. The injection may be performed with a preloaded syringe (already containing the medicine in the barrel—see page 482) or might require that the medicine be drawn up for administration. After you wash your hands, follow these instructions:

  • 1.

    Select the proper syringe and needle. For the treatment of an allergic reaction, a syringe that holds at least 1 mL is necessary, equipped with a 21- or 23-gauge needle (the larger the gauge number, the smaller the diameter of the needle) sufficiently long to penetrate through the skin and fat into the muscle.

  • 2.

    Never touch the metal of the needle with your hands.

  • 3.

    Never share needles (never use the same needle to inject multiple people).

  • 4.

    If the medication is in a preloaded syringe, be sure to see that the amount of medicine does not exceed the dose you want to administer. Be certain not to inject too much medicine.

  • 5.

    If the medicine is in a glass vial, flick the vial a few times with your finger to drive the air bubble to the top, and then snap the vial open at the line marked on the glass at the neck ( Fig. 291 A and B). Draw the proper amount of medicine to be administered up into the syringe ( Fig. 291 C). In the case of epinephrine, this will be 0.3 to 0.5 mL for an adult, and 0.01 mL/kg (2.2 lb) of body weight for a child, not to exceed 0.3 mL.

    Fig. 291, Administering an injection. A, Flick the air bubble to the top of the vial. B, Break off the top of the vial at the narrowing or line. C, Draw the medicine into the syringe. D, Holding the needle straight up, gently push the plunger until (E) no air is left. F, Pinch up a fold of skin and briskly stick the needle through the skin and into muscle at a 90-degree angle for an intramuscular injection, or just under the skin at a 15- to 30-degree angle for a subcutaneous injection.

  • 6.

    If the medication is in a glass bottle with a rubber top, wipe the top of the bottle with alcohol, stick the needle through the rubber, and draw up the desired amount of medication. If you cannot draw the medicine out of the bottle, you might need to inject some air into the bottle first (use the same entry into the bottle to inject air in and to draw medicine out).

  • 7.

    Before injection, point the needle upward, tap the syringe a few times to float the air bubbles to the top, and squirt out any air that is in the syringe ( Fig. 291 D and E). You should be left with only medicine. Try not to inject any air.

  • 8.

    Wipe off the skin with alcohol or with soap and water (if no alcohol is available) where you intend to administer the medicine. The easiest place to inject epinephrine is on the lateral arm at the shoulder.

  • 9.

    Pinch the skin up between your fingers, and quickly plunge the needle in just under the skin at a 90-degree angle to the skin ( Fig. 291 F). With the needle in the skin, gently pull back on the plunger, to see if blood enters the syringe. If it does, you have inadvertently entered a blood vessel, and you should reposition. If no blood is returned, firmly plush the plunger and inject the medicine. Quickly remove the needle from the skin, and gently massage the injection site.

Again, when administering an injection, never share needles between people.

You're Reading a Preview

Become a Clinical Tree membership for Full access and enjoy Unlimited articles

Become membership

If you are a member. Log in here